Kurssit

Insoft on palvellut IT-yhteisöä Ciscon virallisella koulutustarjonnalla vuodesta 2010. Tältä sivulta löydät kaikki olennaiset tiedot Ciscon koulutuksesta.

Katso lisää

Cisco Learning Credits

Cisco opintopisteet (CLC) ovat suoraan Ciscon kanssa lunastettuja prepaid-koulutusseteleitä, jotka helpottavat menestyksen suunnittelua ostaessasi Ciscon tuotteita ja palveluita.

Katso lisää

Cisco Continuing Education

Cisco täydennyskoulutusohjelma tarjoaa kaikille aktiivisille sertifioinnin haltijoille joustavia vaihtoehtoja uudelleensertifiointiin suorittamalla erilaisia kelvollisia koulutuskohteita.

Katso lisää

Cisco Digital Learning

Sertifioidut työntekijät ovat ARVOSTETTUJA omaisuuseriä. Tutustu Ciscon valtuutettuun digitaaliseen oppimiskirjastoon ja kouluta itseäsi tallennettujen istuntojen avulla.

Katso lisää

Cisco Business Enablement

Cisco Business Enablement Partner Program keskittyy Cisco Channel Partnersin ja asiakkaiden liiketoimintataitojen terävöittämiseen.

Katso lisää

Kurssit

Insoft Services on auktorisoitu Fortinet-kouluttaja useassa Euroopan maassa.

Katso lisää

ATC Status

Tarkista ATC-tilamme valituissa Euroopan maissa.

Katso lisää

Kurssit

Insoft Services tarjoaa Microsoftille EMEAR-koulutusta. Tarjoamme Microsoftin teknistä koulutusta ja sertifiointikursseja, joita johtavat maailmanluokan ohjaajat.

Katso lisää

Kurssit

Extreme Networks Technical Trainingin kehitys tarjoaa kattavan progressiivisen polun associate-akkreditoinnista ammatilliseen akkreditointiin.

Katso lisää

ATP-akkreditointi

Valtuutettuna koulutuskumppanina (ATP) Insoft Services varmistaa, että saat korkeimman saatavilla olevan koulutuksen.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

 

Missiomme: Tarjota asiantunteva joukko moderneja ja huippuluokan verkkoautomaatiotaitoja markkinoille asiantuntijapalvelujen avulla.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

 

Autamme organisaatioita ottamaan käyttöön Software-Defined Networking (SDN) -ratkaisuja, kuten Cisco DNA:ta.Lisäksi tiimillämme on laaja kokemus Cisco DNA Centerin integroinnista kolmannen osapuolen järjestelmiin.

Katso lisää

 

Maailmassa, jossa teknologiat kehittyvät nopeasti, jokainen yritys - yritys - tarvitsee kumppanin, johon luottaa ja luottaa verkkoinfrastruktuurinsa sujuvaan ja turvalliseen toimintaan.

Katso lisää

Tiimimme

Koulutusvalikoimaamme kuuluu laaja valikoima IT-koulutusta IP-palveluntarjoajilta, mukaan lukien Cisco, Extreme Networks, Fortinet, Microsoft, muutamia mainitakseni, EMEA-alueella.

Katso lisää

H0LK6S – Deploying the Mobile-First Campus using Aruba OS Switches

Ota yhteyttä

Voit olla meihin yhteydessä ja tiedustella koulutuksistamme täydentämällä yhteystietosi ja koulutuksen nimen oheen.

Tietosuojalauseke ja yksityisyys

Annan Insoft Services Ltd:lle oikeuden olla minuun yhteydessä. Annan Insoft Servicelle oikeuden käsitellä, kerätä ja tallentaa tietojani. Kaikki annetut tiedot käsitellään tietoturvallisesti tietosuojalausekkeen mukaisesti.

Close

H0LK6S – Deploying the Mobile-First Campus using Aruba OS Switches

VARAA NYT
Kesto
5 päivää
Toimitus
(Online ja paikan päällä)
Hinta
Hinta pyydettäessä

The Deploying the Mobile-First Campus using Aruba OS Switches (H0LK6S) course introduces network professionals to the basic features of modern networks such as VLANs, redundancy technologies such as MSTP, Backplane Stacking, link aggregation technologies like LACP, static IP routing, and dynamic routing with OSPF, ACL’s, Multicast, and an introduction to BGP. The learner will experience both theory and hands-on experience utilizing real hardware for lab exercises through our remote lab facility. The learner will configure and monitor Aruba OS Switch products using open standard technologies.

In this course, you will work with layer 2 technologies, such as Multiple Instance Spanning Tree (MSTP) and Link-Aggregation (Trunks). You will also learn about Backplane Stacking. Layer 3 technologies, such as static routes, Open Shortest Path First (OSPF) with Multi-Area implementations, and Border Gateway Protocol (BGP), along with multicast solutions leveraging Protocol Independent Multicast (PIM) both dense and spare modes.

  • Protect devices with local and remote authentication using telnet, SSH, web, and SNMP access
  • Navigate the ArubaOS-Switch CLI and manage the flash file system
  • Upgrade the ArubaOS-Switch switch operating system
  • Configure VLANs on ArubaOS-Switches
  • Implement basic routing on directly connected VLANs or links
  • Configure a ArubaOS-Switches for DHCP server and DHCP relay
  • Interpret ArubaOS-Switches logs
  • Understand how different varieties of spanning tree are implemented on ArubaOS-Switches
  • Configure multiple spanning tree and apply STP security features
  • Differentiate between static and dynamic link aggregation
  • Configure and troubleshoot link aggregation on ArubaOS-Switches
  • Identify applications for static and dynamic routing
  • Configure single-area OSPF routing
  • Understand the basic operation of HPE‚Äôs Backplane Stacking technologies
  • Configure and verify a simple backplane stacking topology
  • Differentiate applications for two- and three-tier network designs
  • Identify an appropriate VLAN design based on a given scenario
  • Based on a given scenario, choose appropriate link types and redundancy solutions
  • Use best practices for IP addressing and OSPF routing when implementing a network design

Module 1. Introduction

  • HPE Introduction
  • Network Design Introduction

Module 2. Basic Setup

  • Connect your management station to the console port on an ArubaOS-Switch and access the CLI
  • Navigate the CLI
  • Configure basic settings, such as the hostname and IP address for VLAN 1
  • Verify your configuration settings

Module 3. Protecting Management Access

  • Implement basic protection using local and remote authentication
  • Implement remote management with Telnet, SSH, Web, and SNMP access
  • RBAC (Role-Based Access Control). Configuration and Verification

Module 4. Management of Software and Configurations

  • Describe the switch bootup process
  • Upgrade the switch operating system
  • Manage switch configuration files

Module 5. VLANs

  • Understanding the use of VLANs and the VLAN types
  • Understanding VLAN port types
  • Configuring VLANs on ArubaOS-Switches
  • Implementing basic VLAN routing on directly connected VLANs or links

Module 6. IP Services

  • The DHCP server and DHCP relay
  • NTP
  • Logging
  • DNS

Module 7. Spanning Tree

  • Explain how RSTP operates and enhances the original 802.1D standard
  • Explain the implementation of PVST+
  • Configure MSTP and use MSTP to provide load sharing
  • Configure STP security features

Module 8. Link Aggregation

  • Identify problems and limitations of STP in load sharing
  • Differentiate between static and dynamic link aggregation
  • Describe how the Link Aggregation Control Protocol works (LACP)
  • Configure and troubleshoot link aggregation on Aruba OS Switches

Module 9. Backplane Stacking

  • Describe how switches in a backplane stack operate as one virtual switch
  • Describe the three topologies supported with backplane stacking and the roles members play in the stack
  • Explain how backplane stacking handles stack fragments
  • VSF Virtual Switch Framework Overview
  • Building and Maintaining VSF
  • Steps to Building VSF
  • Steps to verify VSF
  • VSF Split: MAD
  • VSF Detection Protocols

Module 10. IP Routing

  • Describe VLANs, routing, and static routing
  • Describe dynamic routing with RIP and OSPF
  • Explain single area OSPF configuration

Module 11. OSPF (Multi-area and external area)

  • Deploy ArubaOS-Switches in single-area and multi-area OSPF systems
  • Use area definitions and summaries to create efficient and scalable multiple area designs
  • Advertise routes to external networks in a variety of OSPF environments
  • Promote fast, effective convergence during a variety of failover situations
  • Use virtual links as required to establish non-direct connections to the backbone
  • Implement OSFP authentication

Module 12. ACLs

  • Define ACL and identify the criteria by which ACLs select traffic
  • Configure ACLs on ArubaOS-Switches based switches to select given traffic
  • Apply static ACLs to interfaces to meet the needs of a particular scenario
  • Examine an ACL configuration and determine the action taken on specific packets

Module 13. QoS

  • Configure ArubaOS-Switches to honour the appropriate QoS marks applied by other devices
  • Create a QoS policy that assigns a specified class of traffic to a priority queue
  • Select and implement an appropriate strategy for queue scheduling
  • Implement traffic policing policies that enforce the negotiated committed information rate (CIR), committed burst size (CBS), peak information rate (PIR), and excess burst size (EBS) for a specified class of traffic
  • Respond to congestion in advance by applying the appropriate traffic shaping and Weighted Random Early Detection (WRED) policies
  • Determine the QoS mark that an HPE switch will assign to specific outbound traffic and, if necessary, adjust the mark

Module 14. BGP

  • Establish and monitor eBGP sessions between your routers and Internet Service Provider (ISP) routers
  • Advertise an IP block to multiple ISP routers
  • Filter BGP routes as required for a dual-homed ISP connection
  • Configure a BGP router to advertise a default route in OSPF or to redistribute and aggregate BGP routes, as appropriate

Module 15. Multicast

  • Route multicast traffic using PIM-DM or PIM-SM
  • Select and configure RPs based on particular environmental needs such as redundancy and efficient operation
  • Minimize unnecessary multicast flooding

The Mobile-First Campus using Aruba OS Switches course helps IT professionals who will deploy and manage networks based on HPE ‚Äės Aruba OS Switches.

The Deploying the Mobile-First Campus using Aruba OS Switches (H0LK6S) course introduces network professionals to the basic features of modern networks such as VLANs, redundancy technologies such as MSTP, Backplane Stacking, link aggregation technologies like LACP, static IP routing, and dynamic routing with OSPF, ACL’s, Multicast, and an introduction to BGP. The learner will experience both theory and hands-on experience utilizing real hardware for lab exercises through our remote lab facility. The learner will configure and monitor Aruba OS Switch products using open standard technologies.

In this course, you will work with layer 2 technologies, such as Multiple Instance Spanning Tree (MSTP) and Link-Aggregation (Trunks). You will also learn about Backplane Stacking. Layer 3 technologies, such as static routes, Open Shortest Path First (OSPF) with Multi-Area implementations, and Border Gateway Protocol (BGP), along with multicast solutions leveraging Protocol Independent Multicast (PIM) both dense and spare modes.

  • Protect devices with local and remote authentication using telnet, SSH, web, and SNMP access
  • Navigate the ArubaOS-Switch CLI and manage the flash file system
  • Upgrade the ArubaOS-Switch switch operating system
  • Configure VLANs on ArubaOS-Switches
  • Implement basic routing on directly connected VLANs or links
  • Configure a ArubaOS-Switches for DHCP server and DHCP relay
  • Interpret ArubaOS-Switches logs
  • Understand how different varieties of spanning tree are implemented on ArubaOS-Switches
  • Configure multiple spanning tree and apply STP security features
  • Differentiate between static and dynamic link aggregation
  • Configure and troubleshoot link aggregation on ArubaOS-Switches
  • Identify applications for static and dynamic routing
  • Configure single-area OSPF routing
  • Understand the basic operation of HPE‚Äôs Backplane Stacking technologies
  • Configure and verify a simple backplane stacking topology
  • Differentiate applications for two- and three-tier network designs
  • Identify an appropriate VLAN design based on a given scenario
  • Based on a given scenario, choose appropriate link types and redundancy solutions
  • Use best practices for IP addressing and OSPF routing when implementing a network design

Module 1. Introduction

  • HPE Introduction
  • Network Design Introduction

Module 2. Basic Setup

  • Connect your management station to the console port on an ArubaOS-Switch and access the CLI
  • Navigate the CLI
  • Configure basic settings, such as the hostname and IP address for VLAN 1
  • Verify your configuration settings

Module 3. Protecting Management Access

  • Implement basic protection using local and remote authentication
  • Implement remote management with Telnet, SSH, Web, and SNMP access
  • RBAC (Role-Based Access Control). Configuration and Verification

Module 4. Management of Software and Configurations

  • Describe the switch bootup process
  • Upgrade the switch operating system
  • Manage switch configuration files

Module 5. VLANs

  • Understanding the use of VLANs and the VLAN types
  • Understanding VLAN port types
  • Configuring VLANs on ArubaOS-Switches
  • Implementing basic VLAN routing on directly connected VLANs or links

Module 6. IP Services

  • The DHCP server and DHCP relay
  • NTP
  • Logging
  • DNS

Module 7. Spanning Tree

  • Explain how RSTP operates and enhances the original 802.1D standard
  • Explain the implementation of PVST+
  • Configure MSTP and use MSTP to provide load sharing
  • Configure STP security features

Module 8. Link Aggregation

  • Identify problems and limitations of STP in load sharing
  • Differentiate between static and dynamic link aggregation
  • Describe how the Link Aggregation Control Protocol works (LACP)
  • Configure and troubleshoot link aggregation on Aruba OS Switches

Module 9. Backplane Stacking

  • Describe how switches in a backplane stack operate as one virtual switch
  • Describe the three topologies supported with backplane stacking and the roles members play in the stack
  • Explain how backplane stacking handles stack fragments
  • VSF Virtual Switch Framework Overview
  • Building and Maintaining VSF
  • Steps to Building VSF
  • Steps to verify VSF
  • VSF Split: MAD
  • VSF Detection Protocols

Module 10. IP Routing

  • Describe VLANs, routing, and static routing
  • Describe dynamic routing with RIP and OSPF
  • Explain single area OSPF configuration

Module 11. OSPF (Multi-area and external area)

  • Deploy ArubaOS-Switches in single-area and multi-area OSPF systems
  • Use area definitions and summaries to create efficient and scalable multiple area designs
  • Advertise routes to external networks in a variety of OSPF environments
  • Promote fast, effective convergence during a variety of failover situations
  • Use virtual links as required to establish non-direct connections to the backbone
  • Implement OSFP authentication

Module 12. ACLs

  • Define ACL and identify the criteria by which ACLs select traffic
  • Configure ACLs on ArubaOS-Switches based switches to select given traffic
  • Apply static ACLs to interfaces to meet the needs of a particular scenario
  • Examine an ACL configuration and determine the action taken on specific packets

Module 13. QoS

  • Configure ArubaOS-Switches to honour the appropriate QoS marks applied by other devices
  • Create a QoS policy that assigns a specified class of traffic to a priority queue
  • Select and implement an appropriate strategy for queue scheduling
  • Implement traffic policing policies that enforce the negotiated committed information rate (CIR), committed burst size (CBS), peak information rate (PIR), and excess burst size (EBS) for a specified class of traffic
  • Respond to congestion in advance by applying the appropriate traffic shaping and Weighted Random Early Detection (WRED) policies
  • Determine the QoS mark that an HPE switch will assign to specific outbound traffic and, if necessary, adjust the mark

Module 14. BGP

  • Establish and monitor eBGP sessions between your routers and Internet Service Provider (ISP) routers
  • Advertise an IP block to multiple ISP routers
  • Filter BGP routes as required for a dual-homed ISP connection
  • Configure a BGP router to advertise a default route in OSPF or to redistribute and aggregate BGP routes, as appropriate

Module 15. Multicast

  • Route multicast traffic using PIM-DM or PIM-SM
  • Select and configure RPs based on particular environmental needs such as redundancy and efficient operation
  • Minimize unnecessary multicast flooding

The Mobile-First Campus using Aruba OS Switches course helps IT professionals who will deploy and manage networks based on HPE ‚Äės Aruba OS Switches.

    Kurssiaikataulu
  • ` Oct 2 - Oct 6, 2023
  • ` Oct 30 - Nov 3, 2023
  • ` Nov 27 - Dec 1, 2023
  • ` Dec 25 - Dec 29, 2023
  • ` Jan 22 - Jan 26, 2024
  • ` Feb 19 - Feb 23, 2024