ASR 5000 ePDG System Administration (ePDG)

X

Ota yhteyttä

Voit olla meihin yhteydessä ja tiedustella koulutuksistamme täydentämällä yhteystietosi ja koulutuksen nimen oheen.

Tilaa uutiskirje

Haluan tarjouksia ja tietoa koulutuksista sähköpostiini.

Tietosuojalauseke ja yksityisyys

Annan Insoft Services Ltd:lle oikeuden olla minuun yhteydessä. Annan Insoft Servicelle oikeuden käsitellä, kerätä ja tallentaa tietojani. Kaikki annetut tiedot käsitellään tietoturvallisesti tietosuojalausekkeen mukaisesti.


ASR 5000 ePDG System Administration (ePDG)

VARAA NYT
Kesto
3 päivää
Toimitus
(Online ja paikan päällä)
Hinta
Hinta pyydettäessä

This course provides detailed instruction on how to configure and monitor the Cisco® ASR 5000 to function as an evolved packet data gateway (ePDG) in a 4G Wi-Fi offload network environment.

Upon completion of this course, you should have a thorough understanding of the following aspects of the platform:

  • Performing basic service configuration and monitoring of the ePDG
  • Monitoring the system for proper subscriber session establishment
  • Basic debugging of initial attachment failure

 

  • Day 1: Morning Session
    • Discussion: Course Objectives and Schedule
    • Lesson 1: Getting Started with 4G Wi-Fi Offload
      • Client versus clientless devices
      • Trusted versus untrusted devices
      • ePDG and Wi-Fi infrastructure
      • Role of wireless LAN controller (WLC)
      • SSIDs and VLANs
      • EAP-based WLAN authentication
      • Portal-based WLAN authentication
      • Obtaining IP address of ePDG
      • Initial attachment via ePDG
    • Lesson 2: Hardware Overview of the ASR 5000
      • Viewing card status
      • Viewing port status
      • Basics of link aggregation
      • Lunch
  • Day 1: Afternoon Session
    • Lesson 3: Software overview of the ASR 5000
      • Software tasks on ePDG
      • Session recovery basics
      • Software licensing
      • System file system management
    • Lesson 4: Terminology
      • Logical interfaces
      • Bindings
  • Day 2: Morning Session
    • Review of day one, question-and-answer session
    • Lesson 5: Configuring the ASR 5000 as an ePDG
      • SWu interface
      • IPSec transforms and policies
      • DIAMETER AAA SWm interface
  • Day 2: Afternoon Session
    • Lesson 5: Configuring the ASR 5000 as an ePDG (continued)
      • ePDG service configuration
      • MAG service configuration
      • Role of DNS
      • Lab: Configuring an ePDG
  • Day 3: Morning Session
    • Review of day two, question-and-answer session
    • Lesson 6: Monitoring and Troubleshooting ePDG Operation
      • Viewing subscriber sessions
      • Obtaining IPSec information and statistics
      • Examining the ePDG service
      • DIAMETER proxy operation on the ASR 5000
      • Viewing MAG service operation
  • Day 3: Afternoon Session
    • Lesson 7: Logging on the ASR 5000
      • Viewing system logs
      • Configuring runtime logging
      • Redirecting logging output
      • Logging a subscriber session
      • Configuring a syslog server
      • Crash logging
    • Lesson 8: Threshold Crossing Alarms (TCAs)
      • Alert versus alarm model
      • Displaying threshold crossing alarm settings
      • Configuring threshold crossing alarms
      • Viewing alarms that have fired

This course is designed for participants from any of the following disciplines who are responsible for the planning, configuration, and management of the ASR 5000:

  • Network engineering
  • Network consulting
  • Customer support
  • Field engineering

Following are the prerequisites for this course:

  • Participants must also have a thorough understanding of IP routing, networking protocols, and a basic working knowledge of applicable W-Fi network operation.

 

Participant Material Requirements
Participants are required to bring the following materials to this training course:

  • Laptop or notebook computer with:
    • Terminal emulation program (such as PuTTY, available at http://www.chiark.greenend.org.uk/~sgtatham/putty/) capable of Telnet or SSH
    • 10/100BASE-T Ethernet interface

Participants are responsible for all travel and expenses.

This course provides detailed instruction on how to configure and monitor the Cisco® ASR 5000 to function as an evolved packet data gateway (ePDG) in a 4G Wi-Fi offload network environment.

Upon completion of this course, you should have a thorough understanding of the following aspects of the platform:

  • Performing basic service configuration and monitoring of the ePDG
  • Monitoring the system for proper subscriber session establishment
  • Basic debugging of initial attachment failure

 

  • Day 1: Morning Session
    • Discussion: Course Objectives and Schedule
    • Lesson 1: Getting Started with 4G Wi-Fi Offload
      • Client versus clientless devices
      • Trusted versus untrusted devices
      • ePDG and Wi-Fi infrastructure
      • Role of wireless LAN controller (WLC)
      • SSIDs and VLANs
      • EAP-based WLAN authentication
      • Portal-based WLAN authentication
      • Obtaining IP address of ePDG
      • Initial attachment via ePDG
    • Lesson 2: Hardware Overview of the ASR 5000
      • Viewing card status
      • Viewing port status
      • Basics of link aggregation
      • Lunch
  • Day 1: Afternoon Session
    • Lesson 3: Software overview of the ASR 5000
      • Software tasks on ePDG
      • Session recovery basics
      • Software licensing
      • System file system management
    • Lesson 4: Terminology
      • Logical interfaces
      • Bindings
  • Day 2: Morning Session
    • Review of day one, question-and-answer session
    • Lesson 5: Configuring the ASR 5000 as an ePDG
      • SWu interface
      • IPSec transforms and policies
      • DIAMETER AAA SWm interface
  • Day 2: Afternoon Session
    • Lesson 5: Configuring the ASR 5000 as an ePDG (continued)
      • ePDG service configuration
      • MAG service configuration
      • Role of DNS
      • Lab: Configuring an ePDG
  • Day 3: Morning Session
    • Review of day two, question-and-answer session
    • Lesson 6: Monitoring and Troubleshooting ePDG Operation
      • Viewing subscriber sessions
      • Obtaining IPSec information and statistics
      • Examining the ePDG service
      • DIAMETER proxy operation on the ASR 5000
      • Viewing MAG service operation
  • Day 3: Afternoon Session
    • Lesson 7: Logging on the ASR 5000
      • Viewing system logs
      • Configuring runtime logging
      • Redirecting logging output
      • Logging a subscriber session
      • Configuring a syslog server
      • Crash logging
    • Lesson 8: Threshold Crossing Alarms (TCAs)
      • Alert versus alarm model
      • Displaying threshold crossing alarm settings
      • Configuring threshold crossing alarms
      • Viewing alarms that have fired

This course is designed for participants from any of the following disciplines who are responsible for the planning, configuration, and management of the ASR 5000:

  • Network engineering
  • Network consulting
  • Customer support
  • Field engineering

Following are the prerequisites for this course:

  • Participants must also have a thorough understanding of IP routing, networking protocols, and a basic working knowledge of applicable W-Fi network operation.

 

Participant Material Requirements
Participants are required to bring the following materials to this training course:

  • Laptop or notebook computer with:
    • Terminal emulation program (such as PuTTY, available at http://www.chiark.greenend.org.uk/~sgtatham/putty/) capable of Telnet or SSH
    • 10/100BASE-T Ethernet interface

Participants are responsible for all travel and expenses.

    Kurssiaikataulu
  • ` Feb 6 - Feb 8, 2023
  • ` Mar 6 - Mar 8, 2023
  • ` Apr 3 - Apr 5, 2023
  • ` May 1 - May 3, 2023
  • ` May 29 - May 31, 2023
  • ` Jun 26 - Jun 28, 2023